Pump Worx Mega-Grip XL Power Pump

I have been pumping a long time. I started pumping in college and I'm now in my early thirties. I pump because it has over time given me an increase in both length and girth, although mostly girth. I heard about the new Pipedream line of pumps called Pump Worx and after looking over the line a bit I decided to pick up the Mega-Grip XL Power Penis Pump. I picked the Mega Grip XL because it is a nice looking penis pump, I really liked the look of the pump mechanism and the length of the cylinder. I was happy to see that the Mega-Grip XL comes with everything that I would need to get started right out of the box. The things included in the box were: Acrylic pump cylinder, Pump handle, Hose, Soft PVC/rubber sleeve, Personal lube, Thickening cream, Toy cleaner,Enhancement ring. Apart from taking it out of the box the only things that you have to do to get going is to connect the hose to both the vacuum cylinder and the pump handle, then slide the sleeve onto the base. After the minor assembly tasks you are ready to get pumping! I found that the quality of the cylinder is really high. The vacuum cylinder is made of a hard acrylic material and there is no visible seam and it is pretty thick, the walls measure to approximately 3/16 inches in thickness so this thing could stand-up to any vacuum that you could place on it and and any drops or bumps that come it's way. This tube is big enough that it should accommodate most men without a problem, I took a couple of measurements and it seems to have a usable length of 9.25 inches and a usable inner diameter of 2.375 inches. The release valve is located at the top of the cylinder is the release valve. To release the vacuum you just press the button on the valve. It worked perfectly after I screwed it in a little tighter with my hand, I noticed it was not screwed in tight from the factory which resulted in a loss of vacuum. A simple turn-and-a-half fixed it. If you find you have leaks as well, then check to make sure that your valve is screwed-in tight. Make sure not to over-tighten though because it is only made of plastic and it may break. I like the sleeve that comes with this pump, it is a very soft with a jelly-like material, some combination of PVC and rubber perhaps. The way the sleeve works is that you first slide it onto the base of the cylinder and then insert your penis into the opening in the sleeve. The opening in the sleeve is approximately 1 inch in diameter and because the material is very soft, it can expand to accommodate guys with virtually any amount of girth and maintain a vacuum. One thing I noticed and really liked about the pump sleeve that comes with this pump is I did not see a seam anywhere on this sleeve which I was happy to see because seams are often the weak points where splits occur. Another thing I liked about the included sleeve is that seals around your penis extremely well, it can be difficult to get a completely flaccid penis into it though but that's not uncommon or impossible to overcome, the way around this is to remove the sleeve, apply some of the included cream, now it will be easier to place the sleeve around your penis. Now you can put the sleeve on the cylinder with your penis already in it...bingo! This method works particularly well for guys who are having erectile dysfunction issues or just can't seem to get hard prior to pumping. The pump handle is made of a strong ABS plastic, is easy and comfortable to operate, and offers a great non-slip design. The curved part at the bottom of the one grip makes it so that you can squeeze this thing even if your hands are a bit slippery from cream or lube and they will not slide off which is a huge plus. It also features a nice textured surface that allows you to maintain your grip while still being easy to keep clean. When I first saw pictures of this penis pump, my only concern was the hose might be a cheap plastic material that I would need to replace but it turns-out that it is made of a nice thick, flexible high quality rubber-like material. I am really happy with how thick this hose is and I think that it should last for a long time without replacement. When I use this pump with my penis being near totally flaccid I apply lots of thickening cream and then I slide just the sleeve over my penis and then attached the cylinder to the sleeve. Then I'm off to the races! I want to reiterate how important it is to use cream when pumping. If you intend to partake in any sexual activity after pumping, then it is vital that you get generously greased-up with the cream or lube, without enough lube or cream you may have problems getting your now thick and erect penis out of the pump sleeve. If you intend to use the pump as part of a penis enlargement routine only then the lube is less important. As you pump clear cylinder allows you to see your penis plump and rise as you go which shows it's working. I was able to go a little fewer than a dozen pumps before my penis stopped rising and was fully erect and plump. I usually give it about 30 seconds and press the vacuum release valve, without suction or putting a cock ring on first your erect penis may shrink down about three-quarters of an inch from what it was under the vacuum. When I am going to have intercourse after or I am having a solid pump session I typically put a cock ring on which will maintain my erection after the vacuum is released. For a daily pumping routine I just pump and go once or twice a day, just like a workout. Overall I really like this Pump Worx pump, it works great, easy to operate, easy to clean and it's just fun to use. The included accessories make getting started a easy and you won't need anything else for the first few pumping sessions. If I was to pick one thing that would make it better it would be I would have liked to see a scale on the cylinder so that I could check my size as I pump. Other than that, I would recommend this pump to anyone who either is new to pumping or is an old pro at penis pumps like me.

ProPumper, 12/05/2014
$65.99